HONDA DREAM 50 HRC

AOSHIMA (1/12)

The fender exfoliated, painted all plating with chromium silver,
and applied and polished the chromium silver of a metal color from on the.
Engine exfoliated plating other than a crank case cover with the stamp of HRC,
is the chromium silver into which tea went the cylinder side for a while,
and painted the crank case side with flat aluminum.
The crank case cover with the stamp of HRC applied
and polished the chromium silver of a metal color with the gray of the ground.
By this, it was finished in the silver of eye dark for a while.
The front fork and the rear coil spring used plating as it was.
By having used colorful silver, textures increased considerably.
Moreover, the exhaust pipe also put some chromium silver of a metal color into the before side,
and took out the touch which prepared the tune
and was able to be burned for a while with clear blue and the clear orange.
A hose and all wires were re-covered on the 0.5mm wire.
That it is merely regretful is the point that the brake system should just have made the wire flat aluminum.